Filter
Top Products
6287 ULTRA Users ManualPage 7-4
Functions
Some translate tables perform functions in addition to performing character
translation. Each input hexadecimal character that performs a function is
first translated into 05h. The function that is performed by the 05h character
is determined by the location of the 05h in the table and is indicated by the
code beneath each 05h entry in the table. Each function is listed below,
including a description for each function that does not perform in a standard
manner.
EM (End of Message)
FF (SCS or DSC Form Feed): Dependent upon the setting of Option #2
Lines Per Page. If set to 0 (infinite page length), the ULTRA will send a
form feed whenever a form feed is received. If set to a non-zero value, the
ULTRA will output CR/LF until the lines per page value is reached.
NL (New Line)
CR (Carriage Return)
VCS (SCS Vertical Channel Select)
HT (SCS Horizontal Tab): Converted into the appropriate number of
spaces to reach the next horizontal tab position.
LF (Line Feed)
TRN (Transparency)
BS (Backspace)
ESC (SCS Escape): When the SCS control sequence prefix 2Bh is
received, it indicates the beginning of an SCS format command stream
such as SHF, SVF, SLD, etc.
VT (SCS Vertical Tab): Converted into the appropriate number of line
feeds to reach the next vertical tab position.
GE (Graphic Escape)
IRS (SCS Interchange Record Separator)
NULL (SCS or DSC Null): Output to the printer as a space.
SP (Space)
SA (SCS Set Attribute)
¢ (Trigger 1 character): Processing of the Trigger 1 character depends
upon the setting of Option #30 Pseudo Transparency Mode Selection.