6287 ULTRA Users ManualPage 2-2
Electrical Requirements
The ULTRA requires 117 VAC (60 Hz) at 0.5 ampere, unless optionally
configured for 250 VAC at 1.0 ampere usage.
Plug the power cords of the ULTRA and the printer into different electrical
circuits. Do not use extension cords with the ULTRA.
Users with any questions regarding the electrical service available at their
site should contact a qualified electrician.
Operating Environment
The ULTRA operates best in an environment with a temperature between
50 and 90 degrees Fahrenheit and 15% to 65% relative humidity.
Reasonable clearance should be provided for cooling and air circulation.
Unpacking
After removing the ULTRA from the shipping container, inspect the unit
for any damage in shipment. Immediately report any damage to the freight
carrier. Save the packing container.
Package Contents
Except when ordered otherwise, the 6287 ULTRA includes the ULTRA
protocol converter, a power cord, a parallel printer cable and this users
manual. Should any of these items be missing, contact an AGILE sales
representative. Optional alternate host or printer cables may also be
included.
User’s Manual 6287 ULTRA
Power Cord Parallel Printer Cable
6287 ULTRA
Printer Interface Controller
User’s Manual
AGILE
825 Alfred Nobel Drive
Hercules, CA 94547-1899
(510) 724-1600
(800) 538-1634
FAX (510) 724-9624
6287 ULTRA User’s Manual
POWER
CU
SIGNAL
ALT
HOST
PRINTER
READY
HOLD
PRINT
DATA
OUT
SCS CHECK TEST
KEY
DOWN
RESET PA1 PA2 LINE
FEED
HOLD
PRINT
TEST CANCEL FORM
FEED
ENABLE
PRINT
6287
ULTRA
™