6287 ULTRA Users ManualPage 1-4
6287 ULTRA Front Panel
The front panel of the ULTRA provides ten Status Indicator Lights and nine
Operator Function Buttons.
The Status Indicator Lights show the current functional activity of the
ULTRA. They are described in the following subsection.
The Operator Function Buttons are used to configure the ULTRA from the
front panel. This procedure is described in Section 8 Front Panel
Configuration. The Operator Function Buttons are also used to perform
special ULTRA operations. These functions are described later in this
section.
POWER
CU
SIGNAL
ALT
HOST
PRINTER
READY
HOLD
PRINT
DATA
OUT
SCS CHECK TEST
KEY
DOWN
RESET PA1 PA2 LINE
FEED
HOLD
PRINT
TEST CANCEL FORM
FEED
ENABLE
PRINT
6287
ULTRA
™
}
}
Operator Function Buttons
Status Indicator Lights
Status Indicator Lights
POWER
Power is ON. If the ULTRA is in front panel configuration mode, this is the
only Status Indicator Light that will be lit. If the ULTRA is in alternate host
configuration mode, only the POWER and DATA OUT Status Indicator
Lights will be lit.
CU SIGNAL
The coaxial link between the ULTRA and the cluster controller is active.
ALT HOST
An alternate host print order is being processed.