Filter
Top Products
6287 ULTRA Users ManualPage 3-6
Setting these switches and pressing the RESET button or powering up the
ULTRA will determine whether the ULTRA will operate normally, or
whether it can be configured by sending a command sequence from the
coax host, from the ULTRA front panel or from an alternate host.
With all three switches in the ON (down) position, a dump of the alternate
host data stream can be sent to the printer after pressing the RESET button
on the ULTRA front panel.
A translate table report can be sent to the printer by pressing the RESET
and CANCEL buttons when dip switch B7 is in the ON (down) position.
Switch Bank Tables
Switch Bank A Printer Interfacing/Tests
Function Printer Printer Printer Printer Buffer
Port Test Parity Baud Rate Dump
A1 A2 A3 A4 A5 A6 A7 A8
Par Out Up
Serial Out Down
Normal Up
Test Print Down
No parity Down Down
Odd Up Down
Even Down Up
150 baud Down Down Down
300 Down Down Up
600 Down Up Down
1200 Down Up Up
2400 Up Down Down
4800 Up Down Up
9600 Up Up Down
19.2K Up Up Up
Normal Up
Hex dump Down