Filter
Top Products
Port Configuration
89
NXA-ENET24 - Software Management Guide
All the ports in a trunk have to be treated as a whole when moved from/to, added or deleted from a
VLAN.
STP, VLAN, and IGMP settings can only be made for the entire trunk.
Statically Configuring a Trunk
Command Usage
When configuring static trunks, you may not be able to link switches of different types, depending
on the manufacturer’s implementation. However, note that the static trunks on this switch are Cisco
EtherChannel compatible.
To avoid creating a loop in the network, be sure you add a static trunk via the configuration
interface before connecting the ports, and also disconnect the ports before removing a static trunk
via the configuration interface.
Command Attributes
Statically Configuring a Trunk - Web
Click Port, Trunk Membership. Enter a trunk ID of 1-6 in the Trunk field, select any of the switch ports from
the scroll-down port list, and click Add. After you have completed adding ports to the member list, click
Apply.
Command Attributes
• Member List (Current): Shows configured trunks (Trunk ID, Unit, Port).
•New: Includes entry fields for creating new trunks.
•Trunk: Trunk identifier. (Range: 1-4)
•Unit: Stack unit. (Range: 1-8)
•Port: Port identifier. (Range: 1-26)
FIG. 88
Web - Configuring Port Trunks