Filter
Top Products
Class of Service Configuration
148
NXA-ENET24 - Software Management Guide
Changing Priorities Based on ACL Rules - Web
Click Priority, ACL Marker. Select a port and an ACL rule.
To specify a ToS priority, mark the Precedence/DSCP check box, select Precedence or DSCP from
the scroll-down box, and enter a priority.
To specify an 802.1p priority, mark the 802.1p Priority check box, and enter a priority. Then click
Add.
Changing Priorities Based on ACL Rules - CLI
This example changes the DSCP priority for packets matching an IP ACL rule, and the 802.1p priority for
packets matching a MAC ACL rule.
FIG. 174 Changing Priorities Based on ACL Rules
Console(config)#interface ethernet 1/1300
Console(config-if)#match access-list ip bill set dscp 0275
Console(config-if)#match access-list mac mike set priority 0286
Console(config-if)#end
Console#show marking276
Interface ethernet 1/1
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0
Console#