Filter
Top Products
User Authentication
71
NXA-ENET24 - Software Management Guide
Displaying 802.1x Statistics - CLI
This example displays the 802.1x statistics for port 4.
Filtering Addresses for SNMP Client Access
The switch allows you to create a list of up to 16 IP addresses or IP address groups that are allowed access to
the switch via SNMP management software.
Command Usage
To specify the clients allowed SNMP access, enter an IP address along with a subnet mask to
identify a specific host or a range of valid addresses. For example:
IP address 192.168.1.1 and mask 255.255.255.255 – Specifies a valid IP address of 192.168.1.1
for a single client.
IP address 192.168.1.1 and mask 255.255.255.0 – Specifies a valid IP address group from
192.168.1.0 to 192.168.1.254.
IP filtering only restricts management access for clients running SNMP management software such
as HP OpenView. It does not affect management access to the switch using the web interface or
Telnet.
The default setting is null, which allows all IP groups SNMP access to the switch. If one or more IP
addresses are configured, IP filtering is enabled and only addresses listed in this table will have
SNMP access.
Command Attributes
FIG. 69 CLI - Displaying 802.1x Statistics
Command Attributes
• IP Filter List: Displays a list of the IP address/subnet mask entries currently configured for SNMP access.
• IP address: Specifies a new IP address to add to the IP Filter List.
• Subnet Mask: Specifies a single IP address or group of addresses. If the IP is the address of a single man-
agement station, set the mask to 255.255.255.255. Otherwise, an IP address group will be
specified by any other mask.