Filter
Top Products
Web Interface
21
NXA-ENET24 - Software Management Guide
Panel Display
The web agent displays an image of the switch’s ports (FIG. 2). The Mode can be set to display different
information for the ports, including Active (i.e., up or down), Duplex (i.e., half or full duplex), or Flow Control
(i.e., with or without flow control). Clicking on the image of a port opens the Port Configuration page (see the
Port Configuration section on page 85).
Main Menu
Using the onboard Web agent, you can define system parameters, manage and control the switch, and all its
ports, or monitor network conditions. The following table briefly describes the selections available from this
program.
FIG. 2 Front Panel Indicators
Switch Main Menu
Menu Description
System
• System Information Provides basic system description, including contact information
• Switch Information Shows the number of ports, hardware/firmware version numbers, and power
status
• Bridge Extension Shows the bridge extension parameters
• IP Configuration Sets the IP address for management access
•File
• Copy Enables the transfer and copying files
• Delete Enables the deletion of files from flash memory
• Set Startup Sets the startup files
Line
• Console Sets console port connection parameters
• Telnet Sets Telnet connection parameters
Log
• Logs Stores and displays error messages
• System Logs Sends error messages to a logging process
• Remote Logs Configures the logging of messages to a remote logging process
• SMTP Sends an SMTP client message to a participating server
• Reset Restarts the switch
SNTP
• SNTP Configuration Configures SNTP client settings, including broadcast mode or a specified list of
servers
• Clock Time Zone Sets the local time zone for the system clock
SNMP
• Configuration Configures community strings and related trap functions
• Agent Status Allows SNMP to be enabled or disabled
•SNMPv3
• Engine ID Sets the SNMP v3 engine ID
• Users Configures SNMP v3 users
• Groups Configures SNMP v3 groups
• Views Configures SNMP v3 views