Filter
Top Products
SNMP Protocol
53
NXA-ENET24 - Software Management Guide
Setting SNMPv3 Views
SNMPv3 views are used to restrict user access to specified portions of the MIB tree. The predefined view
“defaultview” includes access to the entire MIB tree.
Command Attributes
Setting SNMPv3 Views - Web
Click SNMP, SNMPv3, Views. Click New to configure a new view. In the New View page, define a name and
specify OID subtrees in the switch MIB to be included or excluded in the view.
Click Back to save the new view and return to the SNMPv3 Views list.
For a specific view, click on View OID Subtrees to display the current configuration, or click on
Edit OID Subtrees to make changes to the view settings.
To delete a view, check the box next to the view name, then click Delete.
Command Attributes
•View Name: The name of the SNMP view. (Range: 1-64 characters)
• View OID Subtrees: Shows the currently configured object identifiers of branches within the MIB tree that
define the SNMP view.
• Edit OID Subtrees: Allows you to configure the object identifiers of branches within the MIB tree.
Wildcards can be used to mask a specific portion of the OID string.
•Type: Indicates if the object identifier of a branch within the MIB tree is included or excluded
from the SNMP view.
FIG. 48
Web - Configuring SNMPv3 Views