Filter
Top Products
Basic Configuration
36
NXA-ENET24 - Software Management Guide
Console Port Settings - Web
Click System, Line, Console. Specify the console port connection parameters as required, then click Apply.
Console Port Settings - CLI
Enter Line Configuration mode for the console, then specify the connection parameters as required. To display
the current console port settings, use the show line command from the Normal Exec level (FIG. 23).
Command Attributes (Cont.)
• Speed: Sets the terminal line’s baud rate for transmit (to terminal) and receive (from terminal). Set
the speed to match the baud rate of the device connected to the serial port or specify
“Auto.”
• Default: 9600 bps
•Stop Bits: Sets the number of the stop bits transmitted per byte.
• Default: 1 stop bit
• Password: Specifies a password for the line connection. When a connection is started on a line with
password protection, the system prompts for the password. If you enter the correct
password, the system shows a prompt.
• Default: No password.
• CLI only.
•Login: Enables password checking at login. You can select authentication by a single global pass-
word as configured for the Password parameter, or by passwords set up for specific user-
name accounts (the default).
• CLI only.
FIG. 22
Console Port Settings
FIG. 23 CLI - Console Port Settings