Filter
Top Products
CLI (Command Line Interface)
198
NXA-ENET24 - Software Management Guide
PoE Commands (Cont.)
Command Function
show power inline status
Use this command to display
the current power status for all
ports or for specific ports.
Syntax:
show power inline status [interface]
interface
ethernet
• unit - This is device 1.
• port - Physical port number on the switch (Range: 1-26).
Command Mode: Privileged Exec
Command Usage: This command displays the following
parameters:
• Admin: The power mode set on the port (see the power inline section on
page 197)
• Oper: The current operating power status (displays on or off)
• Power (mWatt): Displays a list of files in flash memory
• Power (used): The current power consumption on the port in milliwatts
• Priority: The port’s power priority setting (see the power inline priority on
page 197)
Example:
Console#show power inline status
Interface Admin Oper Power(mWatt) Power(used) Priority
---------- ------- ---- ------------ ------------ --------
Eth 1/ 1 enable off 15400 0 low
Eth 1/ 2 enable off 15400 0 low
Eth 1/ 3 enable on 15400 7505 low
Eth 1/ 4 enable off 15400 0 low
Eth 1/ 5 enable off 15400 0 low
Eth 1/ 6 enable off 15400 0 low
Eth 1/ 7 enable on 15400 8597 low
.
.
.
Eth 1/23 enable off 15400 0 low
Eth 1/24 enable off 15400 0 low
Console#
show power mainpower
Use this command to display
the current power status for the
switch.
Command Mode: Privileged Exec
Command Usage: This command displays the following
parameters:
• Maximum Available Power: The available power budget for the switch (see
the power mainpower maximum allocation on page 196)
• System Operation Status: The current operating power status (displays on
or off)
• Mainpower Consumption: The current power consumption on the switch in
watts
• Software Version: The version of software running on the PoE controller
subsystem in the switch. This software can be updated using the copy file
controller command (page 193 see page 55).
Example:
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 375 watts
System Operation Status : on
Mainpower Consumption : 15 watts
Software Version : Version 0x1B64, Build 0x07
Console#