Filter
Top Products
Address Table Settings
110
NXA-ENET24 - Software Management Guide
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic
entering the switch. When the destination address for inbound traffic is found in the database, the packets
intended for that address are forwarded directly to the associated port. Otherwise, the traffic is flooded to all
ports.
Displaying the Address Table - Web
Click Address Table, Dynamic Addresses. Specify the search type (i.e., Interface, MAC Address, or VLAN),
the method of sorting the displayed addresses, then click Query.
Displaying the Address Table - CLI
This example also displays the address table entries for port 11.
Changing the Aging Time
You can change the aging time for entries in the dynamic address table.
Command Attributes
• Interface: Indicates a port or trunk.
• MAC Address: Physical address associated with this interface.
•VLAN: ID of configured VLAN (1-4094).
• Address Table
Sort Key:
You can sort the information displayed based on interface (port or trunk) or MAC
address.
• Dynamic Address
Counts:
The number of addresses dynamically learned.
• Current Dynamic
Address Table:
Lists all the dynamic addresses.
FIG. 114
Web - Configuring a Dynamic Address Table
FIG. 115 CLI - Configuring a Dynamic Address Table
Command Attributes
• Aging Status: Enables or disables the aging time.
• Aging Time: The time after which a learned entry is discarded.
• Range: 10-1000000 seconds
• Default: 300 seconds)