Filter
Top Products
Multicast Filtering
154
Enter the Document Name Here
Assigning Ports to Multicast Services - Web
Click IGMP, IGMP Member Port Table. Specify the interface attached to a multicast service (via an IGMP-
enabled switch or multicast router), indicate the VLAN that will propagate the multicast service, specify the
multicast IP address, and then click Add. After you have completed adding ports to the member list, click
Apply.
Assigning Ports to Multicast Services - CLI
This example assigns a multicast address to VLAN 1, and then displays all the known multicast services
supported on VLAN 1.
Command Attributes
• Interface: Activates the Port or Trunk scroll down list.
•VLAN ID: Selects the VLAN to propagate all multicast traffic coming from the attached multicast router/
switch.
• Multicast IP: The IP address for a specific multicast service.
•Port or Trunk: Specifies the interface attached to a multicast router.
FIG. 184
Web - IGMP Member Port Table
FIG. 185 CLI - IGMP Member Port Table