Filter
Top Products
Spanning Tree Algorithm Configuration
117
NXA-ENET24 - Software Management Guide
Configuring Global Settings - Web
Click Spanning Tree, STA Configuration. Modify the required attributes, and click Apply.
Configuring Global Settings - CLI
This example enables Spanning Tree Protocol, and then sets the indicated attributes.
Configuration Settings for RSTP
Note: The following attributes apply to both STP and RSTP.
• Path Cost Method: The path cost is used to determine the best path between devices. The path cost
method is used to determine the range of values that can be assigned to each inter-
face.
• Long: Specifies 32-bit based values that range from 1-200,000,000.
• Short: Specifies 16-bit based values that range from 1-65535.
• Transmission Limit: The maximum transmission rate for BPDUs is specified by setting the minimum inter-
val between the transmission of consecutive protocol messages.
• Range: 1-10
• Default: 3
FIG. 121
Web - Configuring Spanning Tree
FIG. 122 Web - Configuring Spanning Tree