Filter
Top Products
Port Configuration
92
NXA-ENET24 - Software Management Guide
Dynamically Creating a Port Channel
Ports assigned to a common port channel must meet the following criteria:
Ports must have the same LACP System Priority.
Ports must have the same LACP port Admin Key.
However, if the “port channel” Admin Key is set (page 318), then the port Admin Key must be set to
the same value for a port to be allowed to join a channel group.
Set Port Actor – This menu sets the local side of an aggregate link; i.e., the ports on this switch.
Set Port Partner – This menu sets the remote side of an aggregate link; i.e., the ports on the
attached device. The command attributes have the same meaning as those used for the port actor.
However, configuring LACP settings for the partner only applies to its administrative state, not its
operational state, and will only take effect the next time an aggregate link is established with the
partner.
Command Attributes
If the port channel admin key (LACP admin key, page 318) is not set (through the
CLI) when a channel group is formed (i.e., it has a null value of 0), this key is set to
the same value as the port admin key used by the interfaces that joined the group
(LACP admin key, as described in this section and on page 318).
Command Attributes
•Port: Port number. (Range: 1-24)
• System Priority: LACP system priority is used to determine link aggregation group (LAG) membership,
and to identify this device to other switches during LAG negotiations.
• Range: 0-65535
• Default: 32768
• Ports must be configured with the same system priority to join the same LAG.
• System priority is combined with the switch’s MAC address to form the LAG identifier.
This identifier is used to indicate a specific LAG during LACP negotiations with other
systems.
• Admin Key: The LACP administration key must be set to the same value for ports that belong to the
same LAG.
• Range: 0-65535
• Default: 0
• Port Priority: If a link goes down, LACP port priority is used to select a backup link.
• Range: 0-65535
• Default: 32768