Filter
Top Products
CLI (Command Line Interface)
270
NXA-ENET24 - Software Management Guide
Priority Commands ((Layer 3 and 4)- Cont.)
Command Function
show map ip precedence
This command shows the
IP precedence priority
map.
Syntax:
show map ip precedence [interface]
• interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-4)
Default Setting: None
Command Mode: Privileged Exec
Example:
Console#show map ip precedence ethernet 1/5
Precedence mapping status: disabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 5 0 0
Eth 1/ 5 1 1
Eth 1/ 5 2 2
Eth 1/ 5 3 3
Eth 1/ 5 4 4
Eth 1/ 5 5 5
Eth 1/ 5 6 6
Eth 1/ 5 7 7
Console#
show map ip dscp
This command shows the
IP DSCP priority map.
Syntax:
show map ip dscp [interface]
• interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-4)
Default Setting: None
Command Mode: Privileged Exec
Example:
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#