Filter
Top Products
CLI (Command Line Interface)
244
NXA-ENET24 - Software Management Guide
Link Aggregation Commands (Cont.)
Command Function
show lacp (Cont.) Example:
Console#show lacp 1 internal
Channel group : 1
-------------------------------------------------------------
------------
Oper Key : 4
Admin Key : 0
Eth 1/1
-------------------------------------------------------------
------------
LACPDUs Internal : 30 sec
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 4
Oper Key : 4
Admin State : defaulted, aggregation, long timeout, LACP-
activity
Oper State : distributing, collecting, synchronization,
aggregation,
long timeout, LACP-activity
.
.
.
• Oper Key: Current operational value of the key for the aggregation port.
• Admin Key: Current administrative value of the key for the aggregation
port.
• LACPDUs Internal: Number of seconds before invalidating received
LACPDU information.
• LACP System Priority: LACP system priority assigned to this port
channel.
• LACP Port Priority: LACP port priority assigned to this interface within the
channel group.
• Admin State, Oper State: Administrative or operational values of the
actor’s state parameters:
Expired – The actor’s receive machine is in the expired state;
Defaulted – The actor’s receive machine is using defaulted operational
partner information, administratively configured for the partner.
Distributing – If false, distribution of outgoing frames on this link is
disabled; i.e., distribution is currently disabled and is not expected to be
enabled in the absence of administrative changes or changes in received
protocol information.
Collecting – Collection of incoming frames on this link is enabled; i.e.,
collection is currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
Synchronization – The System considers this link to be IN_SYNC; i.e., it
has been allocated to the correct Link Aggregation Group, the group has
been associated with a compatible Aggregator, and the identity of the
Link Aggregation Group is consistent with the System ID and operational
Key information transmitted.
Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
Long timeout – Periodic transmission of LACPDUs uses a slow
transmission rate.
LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)