AMX NXA-ENET24 Switch User Manual


 
Web Interface
23
NXA-ENET24 - Software Management Guide
Switch Main Menu (Cont.)
Menu Description
PoE
Power Status Displays the status of global power parameters
Power Config Configures the power budget for the switch
Power Port Status Displays the status of port power parameters
Power Port Config Configures port power parameters
Address Table
Static Addresses Displays entries for interface, address or VLAN
Dynamic Addresses Displays or edits static entries in the Address Table
Address Aging Sets timeout for dynamically learned entries
Spanning Tree
•STA
Information Displays STA values used for the bridge
Configuration Configures global bridge settings for STA
Port Information Displays individual port settings for STA
Trunk Information Displays individual trunk settings for STA
Port Configuration Configures individual port settings for STA
Trunk Configuration Configures individual trunk settings for STA
VLAN
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol
Basic Information Displays basic information on the VLAN type supported by this switch
Current Table Shows the current port members of each VLAN and whether or not the port
supports VLAN tagging
Static List Used to create or remove VLAN groups
Static Table Modifies the settings for an existing VLAN
Static Membership by Port Configures membership type for interfaces, including tagged, untagged or for-
bidden
Port Configuration Specifies default PVID and VLAN attributes
Trunk Configuration Specifies default trunk VID and VLAN attributes
Private VLAN
Private VLAN Information Displays Private VLAN feature information
Private VLAN Configuration This page is used to create/remove primary or community VLANs
Private VLAN Association Each community VLAN must be associated with a primary VLAN
Private VLAN Port/Trunk
Information
Displays the interfaces associated with private VLANs
Private VLAN Port/Trunk
Configuration
Sets the private VLAN interface type, and associates the interfaces with a pri-
vate VLAN