Filter
Top Products
Configuring Event Logging
43
NXA-ENET24 - Software Management Guide
Sending SMPT Alerts - Web
Click System, Log, SMTP. Enable SMTP, specify a source email address, and select the minimum severity
level.
To add an IP address to the SMTP Server List, type the new IP address in the SMTP Server text box
and then click Add.
To delete an IP address, click the entry in the SMTP Server List and then click Remove. Specify up
to five email addresses to receive the alert messages, and then click Apply.
Sending SMPT Alerts - CLI
Enter the IP address of at least one SMTP server, set the syslog severity level to trigger an email message, and
specify the switch (source) and up to five recipient (destination) email addresses. Enable SMTP with the
logging sendmail command to complete the configuration.
Use the show logging sendmail command to display the current SMTP configuration.
FIG. 32 Web - Enabling and Configuring SMTP Alerts
FIG. 33 CLI - Enabling and Configuring SMTP Alerts