Filter
Top Products
VLAN Configuration
126
NXA-ENET24 - Software Management Guide
Displaying Basic VLAN Information - CLI
Enter the following command.
Displaying Current VLANs
The VLAN Current Table shows the current port members of each VLAN and whether or not the port supports
VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based VLAN for one or two switches, you can disable
tagging.
Displaying Current VLANs - Web
Click VLAN, 802.1Q VLAN, Current Table. Select any ID from the scroll-down list.
FIG. 132 CLI - Displaying Basic VLAN information
Command Attributes - Web
•VLAN ID: ID of configured VLAN (1-4094).
• Up Time at Creation: Time this VLAN was created (i.e., System Up Time).
•Status Shows how this VLAN was added to the switch.
• Dynamic GVRP: Automatically learned via GVRP.
• Permanent: Added as a static entry.
• Egress Ports: Shows all the VLAN port members.
• Untagged Ports: Shows the untagged VLAN port members.
FIG. 133
Web - Displaying Current VLANs
Command Attributes - CLI
•VLAN: ID of configured VLAN (1-4094, no leading zeroes).
•Type: Shows how this VLAN was added to the switch.
• Dynamic: Automatically learned via GVRP.
• Static: Added as a static entry.
• Name: Name of the VLAN (1 to 32 characters).