Filter
Top Products
VLAN Configuration
129
NXA-ENET24 - Software Management Guide
Adding Static Members to VLANs - Web
Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from the scroll-down list. Modify the VLAN
name and status if required. Select the membership type by marking the appropriate radio button in the list of
ports or trunks. Click Apply.
Adding Static Members to VLANs - CLI
The following example adds tagged and untagged ports to VLAN 2.
Adding Static Members to VLANs (Port Index)
Use the VLAN Static Membership by Port menu to assign VLAN groups to the selected interface as a tagged
member.
Adding Static Members to VLANs - Web
Click VLAN, 802.1Q VLAN, VLAN Static Membership. Select an interface from the scroll-down box (Port or
Trunk). Click Query to display membership information for the interface. Select a VLAN ID, and then click
Add to add the interface as a tagged member, or click Remove to remove the interface.
After configuring VLAN membership for each interface, click Apply.
FIG. 137 Web - Configuring a VLAN Static Table
FIG. 138 CLI - Configuring a VLAN Static Table
Command Attributes
• Interface: Port or trunk identifier.
•Member: VLANs for which the selected interface is a tagged member.
•Non-Member: VLANs for which the selected interface is not a tagged member.
FIG. 139
Web - VLAN Static Membership by Port