Filter
Top Products
Class of Service Configuration
145
NXA-ENET24 - Software Management Guide
Mapping IP Port Priority - CLI
The following example globally enables IP Port Priority service on the switch, maps HTTP traffic on port 5 to
CoS value 0, and then displays all the IP Port Priority settings for that port.
Copy Settings
Use the Copy Settings page to copy IP Precedence Priority Settings, DSCP Priority Settings, and IP Port
Priority Settings from a source port or trunk to a destination port or trunk.
FIG. 169 Web - Mapping IP Port Priority
Mapping specific values for IP Precedence is implemented as an interface
configuration command, but any changes will apply to the all interfaces on the switch.
FIG. 170 Web - Mapping IP Port Priority
Mapping specific values for IP Precedence is implemented as an interface
configuration command, but any changes will apply to the all interfaces on the switch.
Command Attributes
• Copy IP Precedence
Priority Settings:
Enables or disables copying IP Precedence Priority settings.
• Copy DSCP Priority Settings: Enables or disables copying DSCP Priority settings.
• Copy IP Port Priority Settings: Enables or disables copying IP Port Priority settings.
• Source Interface: Specifies the port or trunk to copy settings from.
• Destination Interface: Specifies the ports or trunks to copy settings to.
• Copy Settings: Carries out the command.