Filter
Top Products
Multicast Filtering
152
Enter the Document Name Here
Displaying Interfaces Attached to a Multicast Route
r - Web
Click IGMP, Multicast Router Port Information. Select the required VLAN ID from the scroll-down list to
display the associated multicast routers.
Displaying Interfaces Attached to a Multicast Route
r - CLI
This example shows that Port 11 has been statically configured as a port attached to a multicast router.
Specifying Interfaces Attached to a Multicast Router
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier.
Therefore, if the IGMP querier is a known multicast router/switch connected over the network to an interface
(port or trunk) on your switch, you can manually configure that interface to join all the current multicast
groups. This can ensure that multicast traffic is passed to all the appropriate interfaces within the switch.
Specifying Interfaces Attached to a Multicast Router - Web
Click IGMP, Static Multicast Router Port Configuration. Specify the interfaces attached to a multicast router,
indicate the VLAN which will forward all the corresponding multicast traffic, and then click Add. After you
have completed adding interfaces to the list, click Apply.
FIG. 178 Web - Displaying Multicast Router Port Information
FIG. 179 Web - Displaying Multicast Router Port Information
Command Attributes
• Interface: Activates the Port or Trunk scroll down list.
•VLAN ID: Selects the VLAN to propagate all multicast traffic coming from the attached multicast router/
switch.
•Port or Trunk: Specifies the interface attached to a multicast router.
FIG. 180
Web - Static Multicast Router Port Configuration