Filter
Top Products
Multicast Filtering
151
Enter the Document Name Here
Configuring IGMP Snooping and Query Parameters - Web
Click IGMP, IGMP Configuration. Adjust the IGMP settings as required, and then click Apply.
The default settings are shown below.
Configuring IGMP Snooping and Query Parameters - CLI
This example modifies the settings for multicast filtering, and then displays the current status.
Displaying Interfaces Attached to a Multicast Route
r
Multicast routers that are attached to ports on the switch use information obtained from IGMP, along with a
multicast routing protocol such as DVMRP, to support IP multicasting across the Internet. These routers may
be dynamically discovered by the switch or statically assigned to an interface on the switch.
You can use the Multicast Router Port Information page to display the ports on this switch attached to a
neighboring multicast router/switch for each VLAN ID.
FIG. 176 Web - IGMP Configuration
FIG. 177 CLI - IGMP Configuration
Command Attributes
•VLAN ID: ID of configured VLAN (1-4094).
• Multicast Router List: Multicast routers dynamically discovered by this switch or those that are statically
assigned to an interface on this switch.