Filter
Top Products
Protocol Name Result
Console(TelnetSSH)
AuthorizeduserscanuseTelnetand/or SSHto connecttothe
console oftheconnected device simultaneously.Whenmultiple
sessionsfeature isconfigured,simultaneousTelnet and/or SSH
sessionsareallowedthrough the serialport.
Console(Raw)
Authorizeduserscanmakea RawSocket connection totheconsole
oftheconnecteddevice.
Terminal Server (TS) profile connection protocols
When a terminal is connected to the serial port of the appliance, a TS profile must be defined
for the serial port.
Selecting the appropriate connection protocol on the Ports - Physical Ports - General form is
part of defining the TS profile.
When configuring serial ports to support terminals, you can:
• Dedicate a terminal to access a single remote server by means of either Telnet, SSHv1,
SSHv2 or Raw Socket connections.
• Enable a terminal to access multiple servers through the console server.
The TS profile must specify the TCP port number, the terminal type and the IP address for the
remote host on the Ports - Physical Ports - Other form.
The following table describes the connection protocols that can be selected if a terminal is
connected to the selected serial port.
Protocol Name Result
Telnet
Dedicatesa terminalconnectedto aserialporttoaccessaserver
usingthe Telnetprotocol.When the attached terminalisturnedon,
the consoleserver opensaTelnetsessionon theserver.The
server’sIPaddressshouldbe specifiedon theOther form,Ports-
PhysicalPorts-Other.
SSHv1
Dedicatesa terminalconnectedto theselectedserialportto accessa
server usingthe SSHv1protocol.Whenthe attachedterminalis
turned on,theconsoleserver opensan SSHv1session ontheserver.
Theserver’sIPaddressshould bespecifiedonthe Other form,Ports
- PhysicalPorts- Other.
Table 9.2: Available Connection Protocols When Terminal is Connected to a Serial Port
Chapter 9: Ports Menu and Forms 105