Filter
Top Products
The Other form appears.
You can use this form to configure other settings. The options on this form may be less
common settings. The following table describes the available fields in the Other form.
Field Name Definition
TCPPort
TheTCPPort number for aserialport.The TCP portnumbersbydefault startfrom 7001 and
incrementby+1up to the number ofserialportsthatthe console server has.For example,a
console server with 8serialportshasTCPportnumbers7001through7008.
PortIPAlias
Aname(alias) for theIPof the selected port.Aport IPaliasfieldappear whena console(CAS)
profileisselectedfrom the ConnectionProtocolpull-downmenu on the Generalform.
WindowsEMS
Checkboxto enableWindowsEMS(EmergencyManagementServices).Appearsonlywhen a
console (CAS) profileisselected fromtheConnectionProtocolpull-downmenu on theGeneral
form.
TCPKeep-AliveInterval
Specifiesthetimeintervalbetweentheperiodicpollingbythe systemtocheckclientprocessesand
connectivity.
IdleTimeout Themaximum time(in seconds)thata session can beidle beforetheuser islogged off.
STTY Options Setterminaloptions.
BreakInterval
Usually250to 500 milliseconds.It’sa logicalzero ontheTXD or RXDlinesto resetthe
communicationsline.
BreakSequence
Usuallyacharacter sequence~break
LoginBanner Enter the textyouwishto appear asalogin banner when logginginto aterminal.
Hostto Connect
Thisfieldshouldbepopulated withthe IPaddressofthe deviceyouare connectingto. Thefield is
displayedwhena terminalserver (TS) profileisselectedfromtheConnectionProtocolpull-down
menu on theGeneralform.
TerminalType Select thedesiredterminalserver profilefrom the pull-down menu.
SerialConfigurationMode
Key
Thekeysequenceto perform serialportlineconfigurationbyamenu driven in thesessionopened
againsttheserialport.Usersthathaveaccessrightstothe serialport willbeauthorizedtoperform
thisoperation.
Table 9.10: Other Form Fields
To configure TCP port number, STTY options, breakintervaland the login banner for
a serial port connected to aconsole:
1. Go to Ports - Physical Ports in Expert mode and select a port or ports to modify.
2. Select Modify Selected Port(s).
3. Select the Other tab.
122 Cyclades
®
ACS5000 Installation/Administration/User Guide