Filter
Top Products
Form Heading Description Example
Type (Name) Type ofthesensor.
Temperature-
Internal
Current information displays the actual alarm state of the current level based on the configured
thresholds when available. The alarm state can have one of the following values:
• Tripped - when hardware overcurrent protection is tripped
• High Critical - when the value is greater than the high critical threshold
• High Warning - when the value is greater than the high warning threshold and less
than the high critical threshold
• Low Warning - when the value is greater than the low critical threshold and less than
the low warning threshold
• Low Critical - when the value is less than the low critical threshold
Voltage, Power Factor and Power Consumption display either the Estimated or Measured value.
NOTE: Somepower devicesdonothavethecapabilitytoreadtherealinput voltage/power factor using proper
voltage/power factor sensors;in thiscasethe valuesareconfigurable.
When recorded maximum value is provided by the PDU, it is shown in the same row of the
actual value.
Security
Use the following procedure to set or change your password.
To change your password:
1. Select the Security option from the menu panel.
2. Enter your current password in the Current Password field.
3. Enter the new password in the New Password and the Repeat New Password fields.
4. Click OK.
5. Log out and log in using your new password to verify your password change.
32 Cyclades
®
ACS5000 Installation/Administration/User Guide