Filter
Top Products
Before setting up syslogging, make sure a pre-configured syslog server is available on the same
network as the console server. From the syslog server administrator, obtain the IP address of the
syslog server and the facility number for messages coming from the appliance.
To add a syslog server:
This procedure assumes you have the IP address of the syslog server and the facility number for
messages coming from the console server.
1. Select Step 6: System Log. The System Log form displays.
2. From the Facility Number pull-down menu, select the facility number.
3. In the New Syslog Server field, enter the IP address of a syslog server and then click the
Add button. (Repeat this step until all syslog servers are listed.)
4. The new server(s) appears in the Syslog Servers list.
5. Click apply changes.
To delete a syslog server:
1. From the Syslog Server list, select the syslog server that you wish to delete from the current
facility location and then click Delete.
2. Click apply changes.
Chapter 5: Configuring the Console Server in Wizard Mode 49