Filter
Top Products
GT-782
7. Troubleshooting
103
7-2-10. Setting Extra Wipe
When you print under the hot and dry condition, sometimes the printer can not keep the print quality. We recommend using a
humidifier. To increase the wiping time in printing can improve the print quality. This setting can be done separately (CMYK /
White).
(1) Make sure your printer is in either "Standby" or "Ready" modes.
(2) Press the OK Button to open the Menu Display.
(3) Press the Up/Down Button to select the “Maintenance”, and then press the OK Button.
(4) Press the Up/Down Button to select the “Extra Wipe Set”, and then press the OK Button.
The following message appears.
(5) Normal setting is "52 lines". Select either "Every 20 lines" or "Every 10 lines".