Filter
Top Products
7. Troubleshooting
Error
code
Message Meaning Solution
2101 Not Enough Area
The Compact Flash does not have
enough area for storing logs.
Check the free space of the Compact Flash with PC.
Insert a Compact Flash with free area available.
2102 Card Access Error Failure in file reading / writing
Push OK Button to escape menu and re-enter Compact Flash.
Or see " 7-1. Solving Printer Problems".
3000
PC Comm. Error
Send data again
GT-782 failed to receive the print data
(time out).
This error occurs when the USB cable
is disconnected during data
transmission, or data transmission is
canceled on the PC.
Check the connection between the PC and GT-782, and send
print data again. If it has no effect, reboot both the PC and
GT-782.
3001 -
The PC will not receive the data sent
from GT-782 (transmission buffer
overflow).
**
3002 PC Data Error
GT-782 received the data that is not
supported.
3003 PC Data Error
No compatibility of communication
command between the PC driver and
the GT-782 firmware.
The versions of he PC driver and the
GT-782 firmware do not correspond.
Check the connection between the PC and GT-782, and send
print data again. Or reboot both the PC and GT-782.
Contact your dealer or Brother .
3004 PC Data Error
The Check Sums of the received
program data did not correspond when
updating the firmware.
3005 PC Data Error
The Check Sums of the received data
did not correspond when updating
EEPROM.
Reboot and update GT-782 again.
Contact your dealer or Brother .
3006 Received NG Data
GT-782 received the data that is not
supported, or the data transmission
from the PC to GT-782 is interrupted in
an inappropriate way.
The data transmission might be made
from the PC to GT-782 by using a
printer driver not for GT-782.
Check the printer setting of the PC.
Check the connection between the PC and GT-782 and send
print data again.
3007 PC Data Error
GT-782 received a job in which
commands are arranged improperly.
3008 PC Data Error
The Check Sums of the received
commands did not correspond.
3009 PC Data Error
GT-782 received a command that is
not supported.
3010 PC Data Error
A maintenance command is mixed in
normal jobs.
3011 PC Data Error Non-command data is mixed.
3012 PC Data Error
The Check Sums of the received jobs
did not correspond.
Reboot GT-782 and send print data again.
Contact your dealer or Brother
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
4000 PC Data Error
4001 PC Data Error
4002 PC Data Error
4003 PC Data Error
GT-782 received the data that is not
supported from the PC.
Reboot GT-782 and send print data again.
Contact your dealer or Brother .
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
GT-782
107