Filter
Top Products
6. Maintenance
６-１. Replacing Consumables
This section describes how to replace the consumables and the maintenance of the printer.
6-1-1. Replacing the Ink Cartridge
The ink indicator on the Display flashes when the Ink Cartridge is getting low. Prepare the new Ink Cartridge, and replace it
when “Empty XXXX (color)” is displayed.
<Note>
Use the Ink Cartridges described in “1-3-5. Consumable Requirements”.
Be careful not to get ink on your hands or clothing. Wash with soap if stained with ink.
Do not replace cartridges while printing or head cleaning; is in operation it may cause damage to your printer.
Do not disassemble the Ink Cartridge.
Replace the Wiper Cleaner regularly to keep the print quality. The timing will be indicated on the Display of the Control
Panel. See "6-1-2. Replacing the Wiper Cleaner".
To keep the best print result, your printer will show empty status for the color cartridge that is empty. To keep print quality, a
small amount of ink remains to avoid damage to your printer.
(1) Remove the new Ink Cartridge from its packing.
(2) Carefully remove the used Ink Cartridge from your printer.
<Note>
Leave the used Ink Cartridge installed until just before the replacement. Leaving your printer with no Ink Cartridge
installed may cause ink leakage or other serious damages.
Do not put your finger to the Ink Cartridge Slot; otherwise you may get injured with the needle inside.
(3) Insert the new Ink Cartridge securely and ensure the direction and the color are correct.
(Continued on the next page)
GT-78２
69