Filter
Top Products
Thank you very much for buying a BROTHER printer. Before using your new printer, please read the safety instructions below and the
explanations given in the instruction manual.
SAFETY INSTRUCTIONS
[1] Safety indications and their meanings
This instruction manual and the indications and symbols that are used on the printer itself are provided in order to ensure safe operation of this
printer and to prevent accidents and injury to yourself or other people.
The meanings of these indications and symbols are given below.
Indications
DANGER
The instructions which follow this term indicate situations where failure to follow the instructions will
result in death or serious injury.
WARNING
The instructions which follow this term indicate situations where failure to follow the instructions
could result in death or severe injury.
CAUTION
The instructions which follow this term indicate situations where failure to follow the instructions
could cause injury when using the machine or physical damage to equipment and surroundings.
Symbols
· · · · ·
This symbol ( ) indicates something that you should be careful of. The picture inside the triangle indicates the
nature of the caution that must be taken.
(For example, the symbol at left means “beware of injury”.)
· · · · ·
This symbol ( ) indicates something that you must not do.
· · · · ·
This symbol ( ) indicates something that you must do. The picture inside the circle indicates the nature of the
thing that must be done.
(For example, the symbol at left means “you must make the ground connection”.)
[2] Notes on safety
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the
cover of the control unit. Do not touch as high voltage can result in severe injury.
WARNING
Basic precautions
Do not disassemble or modify the printer, otherwise it may
cause fire or electric shocks or problems with correct
operation.
Ask the place of purchase or a qualified technician to carry
out any internal inspections, adjustments or repairs that
may be required.
(Any problems with correct operation that occur as a result
of the customer attempting to disassemble or modify the
printer will not be covered by the warranty.)
Do not handle the power cord with wet hands, otherwise it
may cause electric shocks.
GT-782
i