Filter
Top Products
GT-782
2. Identifying Your Printer’s Parts
13
2-6-3. Menu List
There are some differences in Left/Right menu. White Ink menus are in the right and CompactFlash and general menus are in
the left control panels
Left Menu Content
Head Cleaning
Executes Head Cleaning by one or all four Print Heads.
Refer to "7-2-2. Cleaning the Print Heads"
Normal： normal mis-firing
Powerful：After cleaning the Print Head nozzles, when normal head cleaning does not work.
Tes t Pr in t
Prints to check mis-firing and print quality.
Nozzle Check： shows mis-firing
Standard Check： shows general print quality
Card Data Load Reads print data (ARP file) in CompactFlash. The inside folder shows with [...].
Print Direction
Sets the print direction. This setting is prior to Printer Driver setting.
Auto： Default bi-directional, Printer Driver setting is available.
Always Uni- ： always prints uni-directionally.
Always Bi- ： always prints bi-directionally.
Refer to "7-2-4. Changing the Print Direction".
Maintenance
Goes into the maintenance submenu.
Cap/Wiper Clean： "6-1-2. Replacing the Wiper Cleaner"
Nozzle Cleaning： "7-2-6. Cleaning the Print Head Nozzles"
Head Replacement： "7-2-7. Replacing the Print Head"
Auto Cleaning："7-2-5. Changing the Auto Head Cleaning Setting"
Initial Cleaning： Loads ink into the tube and Print Heads.
Tube Cleaning： 3-time Initial Cleaning to flush the whole tube and Print Heads. (CMYK)
CR Speed Adjust： Adjusts the increase/decrease of the Carriage speed.
Extra Wipe Set： "7-2-10. Setting Extra Wipe"
Total Print Shows the number of prints on the left Platen.
Speaker Volume Adjusts the speaker volume.
LCD Contrast Adjusts the Display contrast.
Whole Update Updates the firmware.
Auto Power-Off
Stops the controllers automatically and save the power after the set hour(s). Default is [0] (no
power off). Turn ON the printer for re-start.
Platen Reset Restores the left Platen.
Language Sets the language shown on the display.
Temperature Sets Fahrenheit / Centigrade
Auto Job Delete
Delete the print data automatically after the print number which is set with Printer Driver is
finished. Default is OFF.
Version Shows versions.