Filter
Top Products
GT-782
7. Troubleshooting
112
Error
code
Message Meaning Solution
6102 Fail: CRG STOP 1
Failure in stopping the Carriage at the
proper position
Check whether the media is jamming in the Carriage.
Clean the Carriage by referring to “7-2-9. Cleaning the Carriage
Shafts”. If the cleaning has no effect, contact your dealer or
Brother .
6103 Fail: CRG STOP 2
Failure in stopping the Carriage at the
proper position (ASIC error)
**
6104 Fail: CRG STP PRT
CR time-out of the Carriage during
printing
6105 Fail: CRG STP FLS
CR time-out of the Carriage during
flashing
**
6110 Fail: BY EEP WRT Failure in writing to EEPROM of BY **
6111 Fail: BY FLSH ERS Failure in clearing FLASH ROM of BY
6112 Fail: BY FLSH WRT Failure in writing to FLASH ROM of BY
6113 Fail: BY FLSH CHK
Defect in FLASH ROM Check Sum of
BY
**
6114 Fail: BY RAM Test Defect in RAM check of BY **
6120 Fail: Head Temp K
Print Head temperature defect (K or
W1)
6121 Fail: Head Temp M
Print Head temperature defect (M or
W2)
6122 Fail: Head Temp C
Print Head temperature defect (C or
W3)
6123 Fail: Head Temp Y
Print Head temperature defect (Y or
W4)
**
6134 Fail: Head VLTG Print Head voltage defect **
6150 Fail: Sur Temp Ambient temperature sensor defect **
6200 Fail: MNT Cap Drv
The operation stopped because the
Cap Driver has overheated.
6210 Fail: MNT Pump Drv
The operation stopped because the
Pump Driver has overheated.
6220 Fail: MNT Wipe Drv
The operation stopped because the
Wipe Driver has overheated.
**
6230 Fail: MNT INK-PCBA
The Maintenance Unit failed to
communicate with the Ink Sensor A
PCB.
**
6240 Fail: MNT INK-PCB
The Maintenance Unit failed to
communicate with either Ink Sensor A
or Ink Sensor B PCB.
**
PRG: SH SCER
1508
Carriage initialization failed.
PRG: SH SCER
1757
Reading EEPROM Timeout (BY)
PRG: SH SCER
1788
Writing EEPROM Timeout (BY)
7000
PRG: SH SCER
XXXX
Communication timeout (SH to BY)
**
7001 PRG: SH Exception
Error inside the program
(Exceptionally occurs in CPU of SH)
**
7002 PRG: SH ILGL TMR
Error inside the program
(Incorrect timer setting of SH)
**
7010 PRG: SH ILGL Arg
Error inside the program
(Argument defect of SH)
**
7011 PRG: SH ILGL RTN
Error inside the program
(Returning value defect of SH)
**