Filter
Top Products
GT-782
7. Troubleshooting
88
7-2-6. Cleaning the Print Head Nozzles
Use the Nozzle Cleaning Kit to clean the Head Nozzle.
<Note>
Pay careful attention in cleaning the clean Print Head Nozzles, which are both delicate and expensive. The Print Head Nozzle
should be cleaned only when it is needed as follows in “7-2-1. Procedure for Solving the Print Quality Problems”.
(1) Make sure your printer is in either "Standby" or "Ready".
(2) Press the OK Button to display the Menu Display.
(3) Press the Up/Down Button to select “Maintenance”, and then press the OK Button.
(4) Press the Up/Down Button to select “Nozzle Cleaning”, and then press the OK Button. The Head Caps and the Wiper
Blade prepare for cleaning.
The following message appears.
(5) Turn off your printer.
(6) Open the Front Cover with both hands after unlocking the cover locks and slide the Latch to fix the Front Cover.
(7) Pull out the Wiper Cleaner Cassette.
<Note>
Do not tilt the Wiper Cleaner Cassette; ink may get on your hands or clothing.
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette).
(Continued on the next page)