Filter
Top Products
6. Maintenance
６. Maintenance
For optimum product performance regular maintenance is required.
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the cover of the control unit. Do not touch as high voltage can result in severe injury.
WARNING
Do not put your hands in the ink cartridge slot, otherwise the needle inside the slot may cause injury.
CAUTION
Wait at least 1 minute after turning off the power switch before opening the front cover.
Do not touch the head heat sink as it may be HOT and may cause a bum.
Be careful not to get your fingers caught when closing the front cover, otherwise it may result in injury to your
fingers.
Do not move the Platen by hand.
The Printer may be seriously damaged by this.
Do not disassemble the ink cartridge.
Take care not to let the ink, Wash Liquid, Maintenance Solution, Pretreatment or waste liquid
come into contact
with your eyes or onto your skin, otherwise inflammation can result. In case of contact with eyes, do not rub but
immediately rinse the eyes with water.
Do not drink the ink, Wash Liquid, Maintenance Solution, Pretreatment or waste liquid under any circumstances,
as they can cause vomiting and diarrhea.
Keep the ink, waste liquid and wash liquid out of the reach of children.
Use only the proper replacement parts as specified by Brother.
GT-78２
68