Filter
Top Products
2. Identifying Your Printer’s Parts
２-５. Under the Platen
4327M
No. Name Description
1 Platen Height
Adjustment Lever
Adjusts the Platen height.
Leftmost "A" is the normal T-shirt position.
Check the exact height with Platen Button on Control Panel when you print on thicker
material.
2 Platen Fixing Lever Fixes the Platen.
Tighten/Loosen this lever to install/uninstall the Platen and to adjust the Platen height.
3 Bush Platen Shaft
4 Platen Positioning Plate
Fixes and holds the Platen.
<Note>
If you print on thick material all the time, you can lower the highest position of the Platen by 10 mm. Replace the Bush Platen
Shaft and Platen Positioning Plate to the ones of GT-541. Refer to "4-4-3. Lowering the Platen height"
GT-782
9