Filter
Top Products
Check the printer and interface cable
Check the printer status and the interface cable connections. (☞96)
Check to see if paper or special print media that you are
using has been selected in the printer driver
If you are printing on a paper size that has not been selected in the
printer driver or the software application, part of text may be cut off.
Use the selected paper size, or change the paper size selection in the
software application. Check the printer driver paper size selection and
make sure that it is the same as the paper size selection of the software
application. If the software application does not allow paper size
selection, select the paper size with the printer driver.
Check to see if you have disrupted the infrared data transfer
in progress or activated other infrared communication
device nearby
Never disrupt the infrared communication between the printer data port
and the computer or PDA port. Any physical disruption of more than
10 seconds will cause cancellation of the print job, and blank sheets will
be ejected from the printer. Remove any physical object blocking the
line of sight between the infrared ports on the printer and computer.
Never attempt to use other infrared devices nearby while a print job is
executing. For example, using electrical home appliances such as
remote controlled TV could disrupt the infrared data transmission
between the printer and computer and cause the print job to halt.
OtherWindows
OtherMacintoshWindows
OtherMacintoshWindows
106
Chapter 6 Troubleshooting