Filter
Top Products
1.
Press the POWER button to switch the printer off.
2.
Connect the power cord to the AC adapter
➊
, insert the DC plug
into the printer
➋
, and insert the power cord into a power source
➌
.
The CHARGE/ERROR lamp will remain illuminated green until
the battery pack is completely recharged.
3.
When the CHARGE/ERROR lamp goes off, you can disconnect
the AC adapter.
• The battery pack requires six hours (maximum) to recharge.
• The battery pack may become warm during a long print job and may
not start recharging until it has cooled (max. 30 minutes).
2
1
3
CARTRIDGE
POWER
ERROR
CHARGE
RESUME
61
Chapter 5 Daily Operation and Printer Maintenance
5