Filter
Top Products
Check the ink level in the ink cartridges
If the low-ink warning has been switched on, and the buzzer beeps
twice the orange CHARGE/ERROR lamp will flash. (☞64) You can
continue the print job until the ink runs out by pressing the RESUME
button, but immediate replacement of the ink cartridge is recommended.
Use the operation panel to reset counter for the low-ink warning
detection. If you are using the printer driver, the counter is reset
automatically. If the counter is not reset, the low-ink warning will not
function correctly.
☞ Low-ink warning and ink cartridge replacement
☞ For details about printer driver, see the Windows Printer Driver
Guinde or Macintosh Printer Driver Guide
Have you been executing a long print job on battery power
only?
When the battery power runs low, the printer emits alternate long and
short beeps and the CHARGE/ERROR lamp lights. Switch the printer
off. Connect the AC adapter to the printer then plug it into a power
outlet, or remove the battery and install a charged battery.
Check to see if you have aborted the BJ Cartridge
replacement
If you discontinue the BJ Cartridge replacement (after pressing the
CARTRIDGE button wait for at least 5 minutes), the printer will beep
3 times and the orange CHARGE/ERROR lamp will flash. The
cartridge holder returns automatically to the home position on the left
side. Press the CARTRIDGE button to continue BJ Cartridge
replacement. If you intend to use the printer in this situation, then press
the RESUME button.
OtherMacintoshWindows
OtherMacintoshWindows
OtherMacintoshWindows
139
Chapter 6 Troubleshooting
6