Filter
Top Products
Lowering the Density setting
1.
From the File menu, select Print.
2.
In the Print dialog box, click the (Manual) icon then click the
Details button.
3.
In the Detailed Setting dialog box, click the Colour icon.
4.
Drag the button on the Density slide bar to the left to reduce the
amount of ink used in the print job.
Battery is not charging
You have been using the printer and you want to charge the battery but
you cannot proceed. The AC adapter is connected to the printer and
plugged into a power outlet, but the CHARGE/ERROR lamp does not
light green.
Executing a long print job?
After prolonged use, the printer may heat up and not allow you to
recharge the battery for about 30 minutes until the printer has cooled.
Wait for the printer to cool, then try to charge the battery again.
OtherMacintoshWindows
OtherMacintoshWindows
Macintosh
135
Chapter 6 Troubleshooting
6