Filter
Top Products
4.
Reset the operation count for the low-ink warning
For every ink cartridge replaced, press and hold down the RESET
button for the required number of beeps.
• BCI-11 Black, BCI-10 Black or
BCI-12 Photo Black replaced? 1beep
• BCI-11 Color or BCI-12 Photo Color replaced? 2beeps
• Both BCI-11 Black/BCI-11 Color, or both
BCI-12 Photo Black/BCI-12 Photo Color replaced? 3beeps
• Cancel immidiately previous operation and try again? 4beeps
• When the low-ink warning is switched on, you must execute the
procedure above. If you fail to execute this procedure, the low-ink
warning will not be reset and the CHARGE/ERROR lamp will not
extinguish.
• If you use the printer driver to replace the ink cartridge, this procedure
is not required. Follow the procedures described in the
Windows
Printer Driver Guide
or the
Macintosh Printer Driver Guide
. The low-ink
warning will be reset automatically by pressing the CARTRIDGE
button at the last step of the replacement procedure.
5.
Press the CARTRIDGE button again to return the printer to the
home position.
Switching off the low-ink warning
1.
Press the POWER button to switch the printer off.
2.
Press and hold down the POWER button until you hear 7 beeps
then release it. This switches the low-ink warning off.
If you released the POWER button at the wrong time, just repeat the
procedure from Step 1.
65
Chapter 5 Daily Operation and Printer Maintenance
5