Filter
Top Products
Replacing an ink cartridge
Replace an ink cartridge when it runs out of ink. The frequency of
changing the ink cartridges will vary according to how the printer is
used. If you frequently print images of heavy density, you will need to
change the ink cartridges more often. For details about cartridge
capacity, refer to the Printer Specifications at the end of this user’s
manual. (☞160)
• To ensure the best performance of the ink cartridges, you should
install ink cartridges within one year of the purchase date and use
them within six months after they are installed in the BJ Cartridge.
• When the low-ink warning is switched on, follow the procedure to
replace the ink tank and reset the low-ink warning detection counter.
(
☞64) After replacing the ink cartridge, press the CARTRIDGE button
to return the cartridge holder to the home position.
1.
Check the POWER lamp and make sure that it is switched on. If the
printer is off, switch it on.
2.
Press the CARTRIDGE button. The cartridge holder moves to the
centre and the POWER lamp starts flashing.
If the print head is overheated, it may not move to the centre
immediately. Wait a few minutes for the print head to cool down. Never
attempt to move the cartridge manually by pushing it or pulling on the
film cable.
3.
Open the top cover.
68
Chapter 5 Daily Operation and Printer Maintenance
Film cable