Filter
Top Products
Receiving Faxes
Chapter 8 Receiving Faxes 8-3
Receiving Faxes Automatically: FAX ONLY MODE
If you have a separate telephone line for your unit, set FAX ONLY MODE for the unit to
answer all calls as fax calls.
Setting FAX ONLY MODE
Your unit is factory-set to FAX ONLY MODE. If you have not changed the receive mode
to Fax/Tel Mode or NET SWITCH*, simply follow this procedure:
1 Press Receive Mode to select FAX ONLY MODE.
• After a few seconds, the LCD changes to this
display:
Ex:
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow
this procedure to set this mode:
1 Press Function.
2 Press Data Registration.
3 Press Set.
4 Use d or u to select RX SETTINGS.
5 Press Set.
6 Use d or u to select RX MODE.
7 Press Set.
Ex:
8 Use d or u to select FAX ONLY MODE.
9 Press Set.
INCOMING RING
FAX ONLY MODE
FAX/TEL AUTO SW
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION
15:00 FaxOnly
FAX ONLY MODE
*NET SWITCH is only available in Australia and New Zealand.