Filter
Top Products
12-14 Maintenance Chapter 12
6 Remove the new BJ cartridge from its
package, then remove the orange
protective cap q and tape w.
• Discard the cap and tape. Never attempt to
reattach them to the BJ cartridge print
head.
• Install the BJ cartridge immediately after
removing the cap and tape.
• Spilled ink can stain any surface; protect
yourself and your work area.
7 With the label facing outwards, insert
the BJ cartridge into the cartridge holder.
Lower the blue cartridge lock lever until it
locks into position.
8 Press C.
• The cartridge holder moves to its home
position on the right side of the unit and
begins cleaning the BJ cartridge print head.
This process takes about 55 seconds.
c
Do not try to manually move or stop
the cartridge holder since this may
damage the unit.
9 Close the printer cover.
10 Close the document tray.*
n
If you need to unplug the unit, wait until it is in standby mode (time and receive mode
displayed in the LCD). Otherwise the cartridge holder may not be in its home position
causing the BJ cartridge to remain uncapped and dry out.
DO NOT TOUCH
THESE PRECISION
COMPONENTS.
1
2
*Hong Kong, Singapore, and Malaysia only.