Filter
Top Products
Chapter 6 Speed Dialling 6-7
Speed Dialling
9 Use the numeric buttons to enter the fax/
Ex:
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialling.
• To enter a pause, press R (Redial)/Pause.
• To correct a mistake in the number, press l to
delete the rightmost digit.
• To delete an entire entry or to change a
previous entry, press Clear.
• If you have already registered a number and
you only want to change the name, ignore this
step.
• To cancel coded speed dialling for the code
you selected, press Clear then Set. Press
Stop to return to standby mode. The
fax/telephone number and the name
registered under that code will be deleted.
10 Press Set twice.
Ex:
11 Use the numeric buttons to enter the name
Ex:
that goes with the number (max. 16 characters,
including spaces).
• If you are unsure how to enter characters,
1 p. 3-3.
• If you have already registered a name and
want to keep the same name, ignore this step.
12 Press Set.
Ex:
13 To continue registering other coded speed
dialling codes, repeat the procedure from
step 7.
-or-
Press Stop to return to standby mode.
Ex:
n
You can print the CODED SPEED DIAL LIST showing all the numbers and names
registered for coded speed dialling (1 p. 6-13). Keep this list near your unit so you can
refer to it when dialling.
15:00 FaxOnly
A02=
DATA ENTRY OK
Canon Inc.
:a
_:A
NAME
DATA ENTRY OK
TEL=3 3758 2111_