Filter
Top Products
Chapter 14 Summary of Settings 14-7
Summary of
Settings
ECM RX
RX MODE
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
COLOUR RX
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode. (1 Chapter 8)
If you select FAX/TEL AUTO SW, you can select
additional sub-settings. (1 p. 8-6)
When the unit is set to FAX ONLY MODE or FAX/TEL
AUTO SW, enables/disables ringing when it receives a
call.**
Selects the number of incoming rings before the unit
begins receiving.
When the unit is set to MANUAL MODE, determines if
the unit switches to fax receive mode after it rings for a
specified time.
If you select ON above, selects the length of time the
unit rings before switching to fax receive mode.
Enables/disables remote receiving.
If you select ON above, selects the remote receiving ID.
Enables/disables memory reception of a document
(e.g. when an error occurs).
Enables/disables colour fax reception. (1 p. 8-12)
ON
OFF
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
OFF
ON
2 TIMES
(1 to 99)***
OFF
ON
15 SEC
(1 to 99)
ON
OFF
25
(00 to 99)
ON
OFF
ON
OFF
(Default settings are shown in bold type.)
*NET SWITCH is only available in Australia and New Zealand.(1 pp. 8-15, 8-17)
**Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the handset, a
telephone, or an extension phone to your unit.
***New Zealand: 1 to 5.
RX (Reception) Settings Menu
For details on accessing the settings below, 1 pp. 14-2, 14-3.
Setting Description Sub-Settings