Filter
Top Products
Chapter 12 Maintenance 12-5
Maintenance
Cleaning the Scanner Components
Follow this procedure to periodically check and clean the scanner components:
1 Disconnect the power cord from the unit.
2 Open the document tray.*
3 Open the operation panel partially by
gently pulling it towards you.
• It only opens slightly.
4 While holding the operation panel
open, clean these components:
❚ Separation guide and separation roller
Wipe with a clean, soft, dry, lint-free cloth.
❚ White sheet and scanning glass
Wipe with a clean, soft, lint-free cloth
moistened with water, then wipe with a
clean, soft, dry, lint-free cloth.
n
• If the scanner components are dirty,
the documents you send or copy will
also be dirty.
• Be sure to use a soft cloth to avoid
scratching the components.
c
Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.
SCANNING GLASS
SEPARATION ROLLER
WHITE SHEET
SEPARATION GUIDE
*Hong Kong, Singapore, and Malaysia only.