Filter
Top Products
Receiving Faxes
Chapter 8 Receiving Faxes 8-7
Follow this procedure to set the Fax/Tel Mode options:
1 Follow steps 1 to 9 on page 8-5.
2 Press Set.
Ex:
3 Use the numeric buttons to enter the
Ex:
time the unit waits before ringing when it
receives a call.
• You can select from 0 to 30 seconds.
• The default setting is eight seconds.
4 Press Set twice.
Ex:
5 Use the numeric buttons to enter the time
Ex:
the unit rings while waiting for someone to
pick up the handset.
• You can select from 10 to 60 seconds.
• The default setting is 22 seconds.
6 Press Set twice.
Ex:
7 Use d or u to select RECEIVE or
Ex:
DISCONNECT.
• This setting tells the unit what to do if no one
picks up the handset within the specified ring
time set in step 5.
• Select RECEIVE to receive the call, or
DISCONNECT to disconnect the call.
• The default setting is RECEIVE.
8 Press Set.
9 Press Stop to return to standby mode.
Ex:
15:00 FaxTel
INCOMING RING
DISCONNECT
RECEIVE
DEFAULT ACTION
30SEC
22SEC
F/T RING TIME
9SEC
8SEC
RING START TIME