Filter
Top Products
11-4 Reports and Lists Chapter 11
TX (Transmission) REPORT
Your unit is factory-set to print a TX (transmission) REPORT only when an error occurs
during sending. To change this setting, 1 TX REPORT, p. 14-5.
If you set the unit to print a report, a TX REPORT or an ERROR TX REPORT, similar
to the ones below, will be printed depending on the setting you select.
TRANSMISSION OK
TX/RX NO 0003 :COLOUR TX
CONNECTION TEL 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 12/27 14:59
USAGE T 00’00
PGS. SENT 0
RESULT NG #018
BUSY/NO SIGNAL
27/12 2001 14:59 FAX 123 4567 CANON 001
*********************
*********************
*** ***
TX REPORT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0004
CONNECTION TEL 20 545 8545
CONNECTION ID Canon EUROPA
ST. TIME 27/12 14:59
USAGE T 00’18
PGS. SENT 1
RESULT NG
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 123456
Our Ref. 350/PJC/EAC 27 December, 2001
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
27/12 2001 14:59 FAX 123 4567 CANON 001
***************************
***************************
*** ***
ERROR TX REPORT
“:COLOUR TX” INDICATES A
COLOUR TRANSMISSION.
IF YOU ENABLE THE PRINT WITH IMAGE
SETTING (1 p. 14-5), THE FIRST PAGE OF THE
FAX WILL PRINT ON THE REPORT TO REMIND
YOU OF THE CONTENTS OF THE FAX (BLACK
& WHITE FAXES ONLY).
OK: TRANSMISSION SUCCESSFUL
NG: SOME OR NO PAGES SENT
NUMBER OF PAGES SENT
TRANSMISSION DURATION
TRANSMISSION TIME